SDRuno v 1.4

  • This topic has 1 reply, 2 voices, and was last updated by .
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1297
    K4MMB
    Participant

      My cpu can’t handle the load with my Duo. So I’m trying to reduce the sample rate to lessen the load. However I cannot find the button to right click in Version 1.4 to change the rate.
      Any help would be appreciated. New to the sdr but not to computers.
      Thanks K4MMB

      #1320
      Andy2
      Participant

        You only get the choice of both SR and DEC buttons when in Zero IF (ZIF) mode. In Low IF (LIF) mode you get only the DEC button, as the SR is fixed at 2 MHz. If you use the ‘amateur band’ buttons to select the frequency you will not see either button as both are fixed to ‘frame’ the band.

        • This reply was modified 3 years, 7 months ago by .
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.