SDRplay RSP1A with SDRtouch on Android V4.4.2

SDRPlay Independent Community Forum Forums SDR Software (RSP Compatible) SDRplay RSP1A with SDRtouch on Android V4.4.2

  • This topic has 0 replies, 1 voice, and was last updated by .
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #1242
    Hugh Hamilton
    Participant

    I should be obliged if someone could advise me as to the basic requirements to get the SDRplay RSP1A,including the SDRplay Android driver,
    to work with SDRtouch on a Samsung SM-T320 running Android V 4.4.2.

    The following, is the report from the SDRplay driver.

    SDR Play: found 1 device opening options
    Only 1 option available, no need to ask user. Opening RSP
    Queueing
    Arguments SdrTcpArguments{gain=24, samplerateHz=1024000, address=’127.0.0.1′, port=35288, ppm=0}
    Starting service with device RSP
    Open async
    SdrTcp: Listening onĀ 127.0.0.1:35288
    sr = 1.024e+06 f = 2.048e+06
    rxCcmd 0
    Permissions granted and device is accessible
    Opening fd 67
    getPath
    getSerialNumber
    rxCcmd 4
    rxCcmd 5
    rxCcmd 6
    rxCcmd 7
    rxCcmd 1
    rxCcmd 0
    Permissions granted and device is accessible
    Opening fd 67
    getPath
    getSerialNumber
    rxCcmd 4
    rxCcmd 5
    rxCcmd 6
    rxCcmd 7
    gc_callback gRdB = 35 lnaGRdB = 18
    Hardware version = 255
    gc_callback gRdB = 37 lnaGRdB = 57
    SdrTcp: Waiting for client…
    Device was open. Closing the prompt activity.
    The rtl-tcp implementation is running and is ready to accept clients
    Acquired wake lock. Will keep the screen on.
    SdrTcp: TCP server succesfully started and listening for clients!
    SdrTcp: Client has connected.
    tcpCommandCallback: enabling 16 bit signed mode
    gc_callback gRdB = 37 lnaGRdB = 57
    agc enabled
    RSP_TCP_COMMAND_SET_ANTENNA 5
    antenna input not supported
    RSP_TCP_COMMAND_SET_LNASTATE 0
    gc_callback gRdB = 34 lnaGRdB = 57
    gc_callback gRdB = 31 lnaGRdB = 57
    gc_callback gRdB = 37 lnaGRdB = 0
    RSP_TCP_COMMAND_SET_IF_GAIN_R 0
    set gain reduction error (3)
    RSP_TCP_COMMAND_SET_AGC_SETPOINT 0
    RSP_TCP_COMMAND_SET_NOTCH 0
    RSP_TCP_COMMAND_SET_BIAST 0
    gc_callback gRdB = 37 lnaGRdB = 0
    gc_callback gRdB = 34 lnaGRdB = 0
    rxCcmd 1
    sr = 1.024e+06 f = 2.048e+06
    rxCcmd 0
    Opening fd 64
    getPath
    getSerialNumber
    rxCcmd 4
    rxCcmd 5
    rxCcmd 6
    rxCcmd 7
    gc_callback gRdB = 35 lnaGRdB = 18
    Hardware version = 255
    gc_callback gRdB = 32 lnaGRdB = 61
    SdrTcp: serveClient cannot send to client
    SdrTcp: Waiting for command thread to die
    SdrTcp: Command listener thread exiting
    Cleaning up…
    SdrTcp: Requested sdrtcp stop asynchroneously
    Waiting for rtl tcp to stop…
    SdrTcp: TCP server shutting down.
    SdrTcp: Closing sdrtcp due to main thread finishing
    SdrTcp: Closing from state 0
    tcpClosedCallback: SDR TCP exited
    SdrTcp: Server thread shut down
    Unitializing hardware
    rxCcmd 1
    Sucesfully closed!
    SDR Play Native has exited successfully
    Successfully closed service
    Wake lock released
    Closing service

    Regards
    Hugh Hamilton

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.