RSPdx won’t connect to Android smartphone

SDRPlay Independent Community Forum › Forums › General › RSPdx won’t connect to Android smartphone

Tagged: 

  • This topic has 1 reply, 2 voices, and was last updated by .
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 9, 2021 at 1:39 am #1847
    VE7NDE
    Participant

      I recently bought an RSPdx and tried connecting it to my Asus ZenFone 5Q with a USB OTG jumper and USB cable. I ran SDR Touch and tried to pull in signals from the RSPdx, but all I ended up with instead was an error message: “No compatible devices found (make sure your USB device is connected, properly powered and your phone/tablet supports USB host mode)”. All of my attempts to enable USB host mode on my phone have failed. Am I missing something? Can anybody offer me some clues?

      August 21, 2021 at 10:55 pm #1902
      jim444
      Participant

        Not sure if it’ll work but another forum recommends you use a 5v dc powered USB hub “1) You MUST provide a D.C. supply to the RSP: To do this you use an external USB hub complete with its own 5 V supply.”

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.