RSPDx Soapy Recommended Gain

SDRPlay Independent Community Forum Forums SDRPlay Devices RSPDx Soapy Recommended Gain

  • This topic has 1 reply, 2 voices, and was last updated by .
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #1211

      Hi Folks

      I’m using SoapySDR with RTL_Airband but am struggling to find an appropriate gain setting. What is clearly confusing me is the ability to either set gain with either:

      gain =
      gain = “IFGR= ,RFGR=”

      Even more of a struggle is that the lower the value? the higher the gain?

      With the use of RTL_Airband and a high quality VHF airband antenna some 5 meters above the house, can anyone suggest appropriate settings that may have worked for them well?




        gain = “IFGR= ,RFGR=”

        higher the number the higher the gain.
        cubicsdr uses soapysdr if you find gain settings that work for you there you can use them in rtl_airband.

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.