Remote via ethernet

SDRPlay Independent Community Forum › Forums › SDR Software (RSP Compatible) › Remote via ethernet

  • This topic has 2 replies, 2 voices, and was last updated by .
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 7, 2020 at 9:06 pm #524
    merlinmaxwell
    Participant

      Wanting to use my RSP1A for ADS-B 1.090GHz) and as good co-ax for that frequency is expensive (pain to route in the house too) I wanted to use it as a USB device over my home network. I found VirtualThere (go google) and now have it running on a Raspberry Pi as the server (WiFi to network) and a Win10 laptop as the client, works transparently. Free for one device, only $50 for unlimited use. I was so impressed that I have stumped up the $50, now what else can I plug in to the Pi? Suggestions on a postcard please…

      January 9, 2020 at 4:25 am #527
      diysdr
      Participant

        tks for posting this. It is now on my to-tinker with list.
        I am guessing that the original rpi is adequate? its just serving up the usb port to enet.

        January 9, 2020 at 10:03 pm #530
        merlinmaxwell
        Participant

          ADS-B now up and running, with a simple antenna in the loft I can get aircraft over 60 miles away. Now for the longer USB lead, so I can put the RX and “proper” 9dBi antenna right up to the ridge. Should be here tomorrow.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.