Mirror Images on display

SDRPlay Independent Community Forum › Forums › SDRUno › Mirror Images on display

  • This topic has 3 replies, 3 voices, and was last updated by .
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 8, 2020 at 12:43 pm #1449
    wchadders
    Participant

      Running SDRuno v1.40 I have mirror images on the panadator these are not an issue on v1.2 which I also have installed.
      I have tried upgrading to v1.40.1 but mirror images are still an issue.

      I have tried searching for Mirror images on this and the old Forum but not found the answer. The only info I found referred to buttons I can’t find in either version of the software I have installed.

      Any help will be appreciated.

      Tnx
      Paul

      November 8, 2020 at 1:45 pm #1450
      Andy2
      Participant

        I had some odd symptoms when I upgraded from 1.3 to 1.4. Overloading, poor gain control and spurious signals being some of the symptoms. A ‘reset to defaults’ from the OPT menu cleared it all up.

        November 8, 2020 at 3:47 pm #1451
        wchadders
        Participant

          That seems to have fixed it. Many thanks
          Paul

          June 7, 2022 at 11:50 am #2076
          sdrlistener
          Participant

            A reset worked for me. I saved my community and frequency files first.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.