Mike’s Frequency Lists: Importing & Using of ?

SDRPlay Independent Community Forum Forums SDRUno Mike’s Frequency Lists: Importing & Using of ?

  • This topic has 4 replies, 2 voices, and was last updated 4 days ago by Robert11.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #350
    Robert11
    Participant

    Hi,

    For some reason, eyesight and old age I guess, using the You Tube videos is hard for me now.

    Might someone, please, just walk me thru all the steps I need to do to import Mike’s Frequency lists into SDRuno. Exact detail would be most appreciated.

    And, I caught a comment re they are set up for a HiZ input.
    I’m using a new RSPdx, without any High Z inputs.

    How do I work around this ?
    Import into Excel perhaps, and change ? What terminology would I change, to what ?
    Then what ?

    Thanks, most appreciated
    Bob

    #356
    Lee
    Participant

    check your ‘My Documents’ folder in C:\Users\~yourusername~
    if you’ve already saved a memory bank file it should have the extension .s1b

    you can download Mike’s .s1b file and copy it to that folder and restart sdruno, load the memory bank and you somewhere on the right hand side it should have a port column, you can click on HiZ and select a new port.

    #357
    Robert11
    Participant

    Hi,
    Thanks for help.
    All set now.

    Question: For my SDRPlay RSPdx, all the Ant inputs shown are wrong.
    Lots of work changing them individually, as so many.

    Any way of doing “globally,” or a whole column of, at once.
    I can only do it individually it seems.

    Thanks,
    Bob

    #359
    Lee
    Participant

    it is just a text file, if you have a text editor with a replace all option (notepad+) is a good free option you can replace HiZ with AntC

    #360
    Robert11
    Participant

    Hi,

    Thanks.

    Bob

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.