Installing SDRplay compatible software on Raspberry Pi 4

SDRPlay Independent Community Forum Forums SDR Software (RSP Compatible) Installing SDRplay compatible software on Raspberry Pi 4

  • This topic has 3 replies, 2 voices, and was last updated by .
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #1644
    srs4511351
    Participant

    I have now built a system on a Raspberry Pi with GNU Radio 3.8, SoapySDR, SoapySDRPlay and gr-osmosdr.
    There are instructions for installing a wide variety of SDR applications.
    Lacking a recent SDRplay rpi image, this get you where you need to be.

    Go to http://radiosrs.net/tech.html and let me know if it works for you.
    Building this system manually will take a lot of time, but is very rewarding.

    —-Steve

    #1649
    perseus68
    Participant

    Great Job. I wish I had read this before my installation 🙂

    73s
    Mark

    #1650
    srs4511351
    Participant

    Thanks. Maybe there are things on the site that you may want to install.
    Are there any improvements that you can make?

    —-Steve

    #1651
    srs4511351
    Participant

    I made a disk image with the installation done.
    See: http://radiosrs.net/tech.html

    —-Steve

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.