CALIBRATE PANADAPTER RSP1A WITH SDRUNO

SDRPlay Independent Community Forum › Forums › SDRUno › CALIBRATE PANADAPTER RSP1A WITH SDRUNO

  • This topic has 1 reply, 2 voices, and was last updated by .
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 4, 2020 at 10:01 am #836
    EA7IEZ
    Participant

      Good morning … first of all, forgive the inconvenience … I have been using a sdr rsp1a panadapter with a yaesu ft897 and the sdruno software for days … I just did not find the problem that I have that I do not synchronize the sdruno software with the equipment in it frequency …. the onmirig works very well but the equipment does not coincide with the frequency since, for example, in the team the correspondent is 7.100 and in the sdruno software in 7.151.5 … I would like to know how to calibrate frequency with the team … greetings
      Francisco
      Ea7iez

      April 5, 2020 at 7:37 am #848
      Andy2
      Participant

        Hi Fransisco. That’s a big error, much bigger than could be explained by a frequency calibration problem. There’s not much activity on here right now, so you would be better going back to the main site and clicking on the Facebook Group button. This will take you to the right place where you can join up and get an answer quickly.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.