Hi Peter,
i’m using a RSPduo.
I decode RTTY and WeFax with MultiPSK and JVComm.
The decoders are fed through VR-Cable Driver and running perfect.
It is important to set SDRUno correctly. USB and NO filters or noice reduction!
How do you feed the Signal to MultiPSK? Is the Output Device properly set in SDRUno?
Have you tried the “normal / inverted” settings in MultiPSK? I have to set “reverse”
In the Picture RTTY Program 2 at 11Mhz as the lower Bands are still closed here.
73
Ralf
