RSPDX / SDRuno squelch issue

SDRPlay Independent Community Forum › Forums › SDRPlay Devices › RSPDX / SDRuno squelch issue

  • This topic has 1 reply, 2 voices, and was last updated by .
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 19, 2020 at 5:52 pm #1238
    fberna
    Participant

      Hello,
      using the RSPDX together with SDRuno software.

      If I listen to a channel with the squelch on, when a station stops transmitting I get a tail of about two seconds before the squelch comes in again.

      This is very annoying when stations have low audio intensity, so you keep the volume high. At the end of the transmission, you get two seconds of awful noise.

      Is there any setting that could prevent that? Tried with the AGC but no difference at all.

      • This topic was modified 4 years, 4 months ago by .
      • This topic was modified 4 years, 4 months ago by .
      July 20, 2020 at 7:47 am #1241
      Andy2
      Participant

        The squelch in Uno is not the best in the world. On weaker signals it’s difficult to find a setting that will close quickly and decisively but will still open again when the signal returns. The Team do know about this and have told me it’s ‘on the list’.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.