SDRPlay Independent Community Forum › Forums › SDRUno › Freq. Display Format ? › Reply To: Freq. Display Format ?
December 3, 2019 at 9:02 pm
#372
SDRplay_Tech
Participant
The frequency is always displayed in Hz and entered in kHz, UNLESS you type 100m for 100 MHz, where the m stands for MHz. You can simply add a decimal point on your keyboard, so if you want to enter 250.1 kHz, simply select the frequency display in the Rx control panel and type 250.1 on your PC keyboard and hit the enter key. Similarly if you want to tune to 104.2 MHz, simply type 104.2m
This is all covered in the SDRuno manual section 3.8 on page 22.
SDRplay_Tech