Reply To: How to use my RSPduo w/ Rpi-3 & command line?

SDRPlay Independent Community Forum Forums General How to use my RSPduo w/ Rpi-3 & command line? Reply To: How to use my RSPduo w/ Rpi-3 & command line?

#1703
alanmalk
Participant

Rebuilt SdrGlut, sdrTest and for good measure, rtaudio.

Ran the requested –info. Also ran –find for additional details.

pi@macpi:~ $ SoapySDRUtil –info
######################################################
## Soapy SDR — the SDR abstraction library ##
######################################################

Lib Version: v0.8.0-g351896d3
API Version: v0.8.0
ABI Version: v0.8
Install root: /usr/local
Search path: /usr/local/lib/SoapySDR/modules0.8
Module found: /usr/local/lib/SoapySDR/modules0.8/libsdrPlaySupport.so (0.3.0-208f95d)
Available factories… sdrplay
Available converters…
– CF32 -> [CF32, CS16, CS8, CU16, CU8]
– CS16 -> [CF32, CS16, CS8, CU16, CU8]
– CS32 -> [CS32]
– CS8 -> [CF32, CS16, CS8, CU16, CU8]
– CU16 -> [CF32, CS16, CS8]
– CU8 -> [CF32, CS16, CS8]
– F32 -> [F32, S16, S8, U16, U8]
– S16 -> [F32, S16, S8, U16, U8]
– S32 -> [S32]
– S8 -> [F32, S16, S8, U16, U8]
– U16 -> [F32, S16, S8]
– U8 -> [F32, S16, S8]

pi@macpi:~ $ SoapySDRUtil –find
######################################################
## Soapy SDR — the SDR abstraction library ##
######################################################

Found device 0
driver = sdrplay
label = SDRplay Dev0 RSPduo 1806037A32 – Single Tuner
rspduo_mode = 1

Found device 1
driver = sdrplay
label = SDRplay Dev1 RSPduo 1806037A32 – Dual Tuner
rspduo_mode = 2

Found device 2
driver = sdrplay
label = SDRplay Dev2 RSPduo 1806037A32 – Master
rspduo_mode = 4

Found device 3
driver = sdrplay
label = SDRplay Dev3 RSPduo 1806037A32 – Master (RSPduo sample rate=8Mhz)
rspduo_mode = 4
rspduo_sample_freq = 8