rsp1a on sdr#

SDRPlay Independent Community Forum › Forums › General › rsp1a on sdr#

  • This topic has 3 replies, 3 voices, and was last updated by .
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 2, 2020 at 4:31 pm #753
    jcmtic
    Participant

      I to all.

      I want to use sdr# for tetra decoding
      Anyone can help me, please ?

      Many thanks

      Jose

      March 13, 2020 at 10:16 pm #764
      M3SNU
      Participant

        Hi Jose, am I right in thinking you want to use sdr# with the tetra plugin and your sdrplay rsp1a to decode tetra?

        Somebody will correct me if I’m wrong but I think sdr# software will not work with the rsp1a. However all is not lost there is a workaround. Although it is a bit long winded. It can be done through audio piping, basically you need vbcable (virtual audio cable) to pipe the Raw iq data stream from sdruno (iq out ) to sdr#/source: ( iq from sound card ) then there are more settings to change I said it was long winded.

        73s M3SNU..

        March 15, 2020 at 12:42 pm #767
        Mike
        Participant

          1 Download the latest SDR#
          2 Download the EXT/IO add on from here SDR#_ExtIO_v1.1.zip http://www.meteorgis.space/files/ExtIO/
          3 Extract both zips into a new folder (SDR# and the EXT/IO add on.
          4 Place your RSP1a EXT/IO dll file into your newly created folder.

          Follow the read me inside the SDR#_ExtIO_v1.1.zip file.

          February 2, 2021 at 4:45 pm #1670
          jcmtic
          Participant

            Thanks I will try.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.

          © 2025