Newbie WWV and Broadcast FM

Are you selecting/using the correct antenna port?
Are you entering the frequency in the correct format? Default is kHz, so you have to add three zeroes to get MHz or you can use the blue ‘MHz’ button.
For instance, just entering ‘100’ will put you on 100 kHz and you won’t hear much. Entering 100,000 will do the trick and you’ll be on 100 MHz. Or enter 100 then press the blue MHz button.
This has come up so many times over the years.
The RSP’s are good, sensitive receivers and will get you listening in seconds, even with just a few feet of wire as an aerial.

Don, that’s very true about the noise picked up on an indoor wire. SDRUno does decode FM stereo, all you do is click on the SWFM (Stereo Wide FM) button. AFAIR, it should just work.

I am thinking your antenna is not effective, you say its a wire but where is it and how is it connected? Just a piece of wire will work some but you really need a good ground to go with it or a wire counterpoise.
take a look at this fellas you tube he explains it quite well

nice uk chap that demonstrates how adding a ground to the overall setup makes a big difference. Without that ground its like plugging in a lamp with only one of the blades of the plug, it won’t light up, similarly you need a good rf ground or counterpoise to complete the circuit for your radio

When its working you will see/hear very strong signals. I do have a nice 120ft g5rv dipole like antenna and I can hear wwv on 2.5, 5, 10, sometimes 15mhz and overwhelming signals in between not to mention little weak signals of WSPR. aircraft, weather stations, all that stuff. It receives better than almost all low-med $$$ transceivers. I listen with it and if I hear an interesting ham I turn on my transceiver to talk to the person. On ~7mhz heard hams in South Africa, Hawaii, Austrailia on the same evening.

First I would get some coax cable and connect the center conductor and shield to that sma connector center and outside shield. 75ohm TV coax cable is fine. run the coax cable out of a window and THEN connect that 60′ piece to the center conductor of coax and then your counterpoise to the shield on that end. Ideally the counterpoise would go in exactly the opposite direction but for listening only it doesn’t make as much difference just string it out, same 60′ length would be better in about the opposite direction. Doing it this way gets your antenna outside of your noisy house environment. In the old days some 60 years ago it didn’t make as much difference but these days the inside of your house is just loaded with noise that can mask the signals that you are wanting to hear.

Some will say to install a balun where the coax attaches to the antenna but depending on your noise environment it may not make much difference.

ck out these links or just google dipole antenna
m/search?q=simple+dipole+antenna&rlz=1C1PRFC_enUS549US549&sxsrf=ACYBGNSexWCrbaBbdXhIMM_0ZwwoOn4X5A:1577472731439&tbm=isch&source=iu&ictx=1&fir=zFXy6Nwb0DAzlM%253A%252CsvcZGKqPMN0wvM%252C_&vet=1&usg=AI4_-kRVWH7RgwA7axCKLwACPtXzBof2WA&sa=X&ved=2ahUKEwiDg7Puv9bmAhWJZM0KHVh1AtYQ_h0wIXoECAkQDw#imgrc=zFXy6Nwb0DAzlM:

sunspots must be up again, 15M dx is up. 73 have fun, oh on the antenna the higher the better of course.

I can’t help feeling there some ‘finger trouble’ going on here. You shouldn’t have any trouble receiving FM broadcast signals as long as you select the right mode (wide FM) and set the gain to midway. Likewise, MW broadcast should come romping in, even on a fairly basic wire antenna. Can you post a screenshot of SDRUno receiving broadcast FM so we can see the various settings?